Baby
Inspired by Phil Edwards and his balsa board he called “baby”. This model trims and turns with ease. The outline is sleek and overall rocker is flat. The 60/40 rails provide control and flow through turns. Works best in waves 2-6 feet.
Recommended fin: Baby glass-on or Quigg speed fin.
Mike Rogers Model
The Mike Rogers model is a design Tanner and Mike have been working on for over 10 years. It has a very balanced outline and foil. It is a great all around board and daily rider. Works great in a variety of waves from 2-3 foot Blackies to 6-8 foot Newport Point. Best with a Greenough style flex fin.
Dirty Martini
Levi Prairie signature model. Great all around log with a pulled in nose. Really loose and jivey in the pocket. Enhances style and subtle flair. Flat rocker overall and pinched 50/50 rails. Works best in 2-4 foot waves. As seen on the cover of The Surfer's Journal.
Gliders
Inspired by Skip Frye. This style board is meant to harness the beauty and simplicity of riding waves. Around 11 foot in length, these boards glide into waves with ease. They like to trim in the pocket and the length encourages smooth turns. There are many variations of gliders, from the classic pintail to a long fish shape. Really fun in a variety of waves from 2-6 feet. Works well with a variety of fin setups.
Marshall Pig
More details coming soon.
Mr. Wizard
More details coming soon.
Dove
More details coming soon.
Long Fish
More details coming soon.
T~Chip
More details coming soon.
Baby 2.0
More details coming soon.
Tradesman
More details coming soon.
Dash
Inspired by the “Malibu chip” board from the 1950s, this board is a modern take on a classic era. The original outline was pulled off a Mike Marshall board shaped for Kio, aka Yellow Rat. This design encourages in-the-pocket traditional surfing and finding the perfect trim. Works best in clean logging waves and point breaks. Overall flat rocker and neutral bottom with 60/40 rails. Works best with an 8.5” Quigg speed fin.
Luna
Luna is Tanner's take on the traditional noserider. Nose concave, parallel rail, wide point aft of center, and tail kick work together to provide lift and a steady platform on the nose. Everything is blended so trim isn't compromised in the center of the board. Take a step back and the tail kick lets you pivot from rail to rail. Works best in 2-4 foot waves.
Paisley
Midlength. This pintail egg is a really fun all around board. It catches waves easily and gets up to trim even on smaller waves. Works well in 3-6 foot waves. Can be customized with different fin configurations.
Standard Hull
Midlength. If effortless speed and down-the-line trim is what you're after, this is the board. Inspired by Greg Liddle. This board works well in point waves and clean, lined-up beach breaks. Smooth planing shape, pinched rails, hull entry and “S” deck give this board its unique characteristics. It is very different from conventional boards, so there is a bit of a learning curve. It encourages a more front-foot style of turning. The feeling of drawing out a big bottom turn and locking into trim is like no other. Works best with a Volan flex fin.
Flower
Midlength. This model is a cross between a vee bottom and a hull, yet it's more user friendly than both. It excels in point waves and clean beach breaks. Hull entry, neutral bottom, and rolled vee in the tail. Catches waves easily. Tanner's favorite size is 8'4". Works best with a flex fin.
Scout
The Scout is a glider design inspired by Skip Frye. It works well in a variety of conditions in waves 2 to 6 feet. It has a slight rolled entry to a single concave in the center, blended to a double concave in front of the fin to vee out the tail. The edge in the tail gives it some bite in the turns. Recommended fin: 8.5 inch flex fin.
Wood
Heirloom pieces built to last, with materials from the past.
Solid balsa boards like the T~Chip are made to order. Reach out to start yours.
Special Projects
Tanner has partnered with many brands over the years to bring their ideas and designs to life. From initial concept to final product, Tanner's attention to detail ensures every design is executed correctly. Brands he has worked with include Saint Laurent, RVCA, Art of Jiu Jitsu, Trilogy Financial, MadHappy, and many more. Let us know what ideas you have and we will find a way to make it happen.
Featured: Tanner x Thomas Campbell. A Dash model shaped to Thomas Campbell's specs, featuring original artwork he painted on a surf trip in Mexico, printed onto fiberglass and glassed into each board. Built to order with a 2-inch balsa stringer and a glassed-on Quigg Speed fin. Starting at $2,500.
Custom Board Pricing
Shortboards — $895
Midlengths / Fish up to 7'11" — $1,095
Mini Logs 8'0"–8'11" — $1,195
Longboards 9'0"–9'11" — $1,495
Longboards 10'0"–10'11" — $1,695
Gliders 11'0" and up — $1,895
Extras: Color $100 per side · Volan $100 per side · ISO Resin (Marine) $100 · Resin Pinlines from $125 · Resin Panels price upon request · Custom Stringer from $100 · Polish $250 · Polish with Glass-On Fin $300 · Wood Glass-On Fin $300 · Fiberglass Glass-On Fin $225 · Tail Block from $75
Prices do not include sales tax. A $500 deposit is required to begin.
